aditya.knarr

Here I worked on my Git README, but it took longer then expected because it kept reseting my README and the git repo, I used GPT-5 Mini for some debugging. I finally used git mostly on my own (Yayyy!).

Here I updated my git a little bit, and I insulated my wire ends, and taped it up a bit more.

I soldered all the wires together and made it more stable. I also attached it to the gun after and taped/glued everything into place. I just need to place the motors at the correct distance. My first solder!!! (A little bad I think)

Attached Motors to my gun and am planning to add the battery as a 9v battery, and 3d printed the stand to hold it onto the gun