I made a new case for the Carbopad because I think it deserves better than to look like something someone just threw together and didn’t care about
0
Log in to leave a comment
Activity
Shipped this project!
I built a macro pad using an ESP32 and cardboard. I chose cardboard because it was the most readily available material I had—I don’t own a 3D printer. The worst part was when I spent several hours trying to fix the code, only to find out that the whole time the problem was that I had the GND wire in the wrong pin. I learned how to use Bluetooth on the ESP32 and how to organize a project, and also that I need to keep an eye on the pins, haha. Considering this is one of my first functional projects, I’m very proud of it and really enjoyed making it.
So, after about three hours of debugging, I realized that the problem the whole time was that I had the gnd cable plugged into the wrong port.
0
Log in to leave a comment
After two hours of struggling with the code, I managed to fix it, and then I added the rest of the buttons
0
Log in to leave a comment
First connection of the buttons and ESP32 to the breadboard
0
Log in to leave a comment
My first DevLog :)
0
Log in to leave a comment