2 devlogs
1h 22m 30s
Anycubic stopped making these so I took the matter into my own hands.
also constuct is too basic for me. I cad too fast
Shipped this project!
It works really well!
This is a replacement to the spinning part that turns the isopropyl into a vortex to wash resin-printed parts.
Anycubic stopped selling it so I had to reverse engineer existing ones and make my own.
This is not in #construct because I cad too fast. I am too good for that program sadly
I forgot to migrate the heartbeats from onshape woops
after printing a test I realized the paddles are too short and base is too big so I fixed that and added better access to the nut area of the bolts.
After printing again I realized gravity exists so I added a lip for the bearing
0
Log in to leave a comment
I made the model of the rotor without the magnets. I tried to copy anycubic’s wash and cure 3 rotor style
0
Log in to leave a comment