1 devlog
3h 4m 17s
It uses charlieplexing to light up 20 LEDs. Made by me. Was already finished tho… so just to track it.
Implemented Charlieplexing class. Animation and Frame. This was before time was even tracked. It should just light up some LEDs. The code was tested on an Arduino UNO, as it was the only available piece of hardware at that moment. Furthermore, 6 LEDs (meaning 3 pins) on the arduino were used. The reisistors used were 220 Ohm resistors, meaning the current for each LEDs was around 6mA.
0
Log in to leave a comment